"; _cf_contextpath=""; _cf_ajaxscriptsrc="/cfthorscripts/ajax"; _cf_jsonprefix='//'; _cf_websocket_port=8578; _cf_flash_policy_port=1244; _cf_clientid='6834EE60621C8BAFF6C27E07284475AC';/* ]]> */
| |||||||||||||||||
High-Speed USB 2.0 and 3.0 Cables and USB Power Cables![]()
USB-A-79 USB 2.0 Type A Male to Type B Male USB-C-72 USB 2.0 Type A Male to Type A Female USB-AB-72 USB 2.0 Type A Male to ![]() Please Wait All the cables sold by Thorlabs with a USB 2.0 or 3.0 compatible connector are displayed on this page. We also offer a USB 3.0 PCIe card. The following links will take you to web pages that contain cables with BNC, SMC, SMA, and Banana connectors.
![]()
The USB 2.0 Type-A high-speed, black extension cables come in various lengths. *This represents a maximum speed. The actual speed will depend on the system in which the cable is used. USB 2.0 specification limits the length of a cable for full-speed devices to 5 meters; low-speed devices to 3 meters. ![]()
These durable USB 2.0 cables feature a Type-A male connector on one end and a Mini-B male connector on the other. This allows any device with a USB Mini B port to be connected to a computer with a USB port. The USB-ABL-60 cable also features a locking screw to prevent accidental disconnects on compatible ports, like those featured on our PM101 and PM102 Series of power meters. ![]()
These industry standard, USB 2.0 cables directly interface most standard USB peripherals to a PC or Mac. The cable includes a Type A plug, for PC/Mac interface, on one side and a Type B plug, for standard peripheral connection, on the other. These durable cables are molded in a black jacket and are fully compliant with the USB 2.0 protocol. Note: Cable color may vary without notice. ![]()
We also offer a USB 3.0 Type-A to Micro-B cable. The cable measures 118" long and features screws on either side of the Micro-B connector that mate with tapped holes for securing the USB cable to the equipment. ![]()
The T1508 is a test lead holder for wires up to 0.210" (5.33 mm) in diameter and has 14 slots for cables. It is ideal for holding fiber optic patch cables. The T2708 is a test lead holder for wires up to 0.450" (11.43 mm) in diameter and has 9 slots for cables. The cable racks are made from cold rolled steel with a baked enamel finish. The wall mounting holes are separated by 3" (76.2 mm). Both racks are 11" (279 mm) long and extend outward from the wall by 3.5" (88.9 mm). | |||||||||||||||||
|