• Ideal for 4 mm Travel Stages
• 8 mm Total Travel
• High Load Capacity
• Non-Rotating Tip
• Manual Adjuster Knob Provided
• 3 m (9.8') Connection Cable Included
• Compatible with Modular Quick-Connect Adapter

The DRV001 Modular Stepper Motor Actuator is ideal for short travel stages equipped with the Modular Quick-Connect adapter such as the MAX300 and MAX600 series flexure stages. This actuator is capable of speeds as high as 4 mm/s with 8 mm of travel with a minimum incremental movement of 60 nm. The powerful stepper motor is capable of handling a load capacity of up to 48 lbs (22 kg). Bidirectional repeatability is 0.5 µm.

Using the MCA series quick connect adapters, these actuators can also be fitted to stages with standard (3/8" or 10 mm) mounting clamps.

A 3 m (9.8') PAA613 cable is included for connecting the stepper motor to the controller. If a shorter cable is required, a 1 m (3.3') PAA612 cable is also available separately.

• Travel: 8 mm (0.315")
• Max Load Capacity: 48lbs (21.8 kg)
• Motor Type: 2 Phase Stepper
• Lead Screw Pitch: 0.5 mm
• Bidirectional Repeatability: 0.5 µm
• Minimum Incremental Movement: 60 nm
• Feedback: None
• Micro Steps per Revolution of Leadscrew: 25,600
• Limit Switches: Ceramic Tipped Mechanical
• Speed Range: 40.0 µm/s to 4 mm/s
• Full Step Angle: 1.8°
• Step Angle Accuracy: 5%
• Rated Phase Current: 1 A
• Phase Resistance: 4.6 O
• Phase Inductance: 0.6 mH
• Holding Torque: 23.1 N-cm
• Detent Torque: 1.7 N-cm
• Rotor Inertia: 32 g-cm²
• Insulation: Class B
• Compatible Controllers: BSC201 MST601