Create an Account  |   Log In

View All »Matching Part Numbers


Your Shopping Cart is Empty
         

Magnetic Measuring Tape and Beam Height Ruler


  • Hands-Free Measuring
  • Imperial and Metric Scales

MFT1

BHM1

6" (155 mm) Magnetic Ruler
 with Holes for Laser Beam Alignment
 and Height Measurement

Application Idea

BHMA1 Bracket Attaching Two Beam Height Rulers for Vertical and Horizontal Alignments

BHMA1

Mounting Bracket for Beam Height Rulers

Related Items


Please Wait

Thorlabs offers two solutions for hands-free measuring on an optical table or breadboard. First, our MFT1 Magnetic Measuring Tape lays flat on any magnetic surface to provide a reference for the position of components. Second, our BHM1 and BHM2 Magnetic Beam Height Rulers features holes at 25 mm and 1" intervals to allow a laser beam to pass through. The rulers are laser engraved with both imperial and metric scales and are held onto any magnetic surface by two magnets in their bases.

Mounting Brackets are also available that allow two beam height rulers (Item # BHM1 and BHM2) to be attached at a 90° angle. This allows for alignment of a laser beam horizontally in addition to measuring its height off the table.


Posted Comments:
mojtaba.zamani.a  (posted 2017-08-19 08:14:20.493)
is it possible to buy MFT1 without your logo on it? we just need magnetic tape with its graduations.
nbayconich  (posted 2017-08-28 05:57:19.0)
Thank you for contacting Thorlabs. I will reach out to you directly about providing this as a custom option.
cbrideau  (posted 2013-06-03 18:24:11.48)
I would love to see a narrower version of this, say 1cm wide, to make it easier to use on a crowded optical table.
tcohen  (posted 2013-06-13 12:49:00.0)
Response from Tim at Thorlabs: Thank you for your suggestion. I agree this would be a convenient alternative for tight spaces and I am looking into offering this.

Magnetic Measuring Tape


Click to Enlarge
MFT1 Measuring Tape Covering One Row of Holes on an Optical Table
  • Magnetic Over Entire Backside of Ruler
  • Attaches to Optical Table or Breadboard for Hands-Free Measurement Guide
  • Flexible Material for Easy Rolling and Storing
  • Numeric Marks Every 1" and 1 cm, Tick Marks Every 1/8" and 1 mm
  • L x W x Thickness: 1 m x 1" (25.4 mm) x 0.03" (0.8 mm)

This vinyl magnetic measuring tape provides a convenient solution for determining approximate distances hands free on an optical table or breadboard. With a magnetic back that extends over the full length and width of the ruler, this measuring tape lays flat on any magnetic surface and features both imperial and metric scales, with numeric marks every 1" and 1 cm and tick marks every 1/8" and 1 mm. Only 0.03" (0.8 mm) thick, the ruler maintains a low-profile on the table. If a shorter length is desired, the ruler can be cut into segments. Please note that vinyl can stretch; consequently, this measuring tape should be used as an alignment aid and not as a precision measurement tool.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
MFT1 Support Documentation
MFT1Magnetic Measuring Tape, 1 m Long
$5.52
Today

Magnetic Beam Height Rulers

BHM1 Typical Application
Click to Enlarge

Light from a HeNe Laser Passing Through a Hole in a BHM1 Ruler
  • Imperial and Metric Laser Engraved Scales
    • 1.0 mm Metric Graduations
    • 1/16" Imperial Graduations
  • Facilitate Laser Beam Alignment Using Holes Spaced at 1" and 25 mm Intervals
  • Measure Beam Height on Magnetic Optical Tables or Breadboards
  • Two Neodymium Magnets Provide Holding Force
  • Homogeneously Diffusive Anodized Coating

Our BHM1 and BHM2 Magnetic Rulers measure beam heights up to 6" (155 mm) or 12" (305 mm), respectively. The front of the screen is laser engraved with 1.0 mm and 1/16" graduations for beam height measurement. Twelve Ø2.0 mm (Ø0.08") holes positioned next to the engraved numbers at 25.0 mm and 1.00" intervals allow the laser beam to pass through the ruler.

The base of each ruler is fitted with a pair of neodymium magnets that hold the ruler to magnetic work surfaces and provide flexibility of movement when compared to an option that is bolted to the table. They are constructed from bead-blasted aluminum to remove any sharp edges and then anodized to create a homogeneously diffusive surface. The compact size allows the tool to fit into small gaps between components, enabling easy integration into a setup.

We also offer the BHMA1 bracket below for attaching two beam height rulers, allowing for the alignment of a laser beam horizontally in addition to measuring its height off the table.

Please note: Due to the presence of magnets, this ruler should not be used in the vicinity of pacemakers, credit cards, or other devices affected by magnetic fields.

Item #Dimensions (W x H)Footprint (L x W)Numbered GraduationsGraduationsHole SpacingHole DiameterDamage Threshold
BHM1 30 mm x 160 mm
(1.18" x 6.30")
30 mm x 30 mm
(1.18" x 1.18")
Every 1" and 10 mm 1/16" and 1.0 mm 1.00" and 25.0 mm 2.0 mm (0.08") >350 J/cm2
(1064 nm, 20 ns, 20 Hz, Ø1.14 mm)
BHM2 40 mm x 310 mm
(1.57” x 12.20”)
48 mm x 40 mm
(1.89” x 1.57”)
Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
BHM1 Support Documentation
BHM16" (155 mm) Magnetic Beam Height Measurement Tool
$22.72
Today
BHM2 Support Documentation
BHM212" (305 mm) Magnetic Beam Height Measurement Tool
$44.64
Today

90° Mounting Bracket for Magnetic Beam Height Rulers


Click to Enlarge

BHM1 Mounted at 90° on a BHM2 Using the BHMA1 Bracket

Click to Enlarge

VRC4 on a BHM1
  • Mount Two Beam Height Rulers Perpendicularly
  • Ideal for Horizontal and Vertical Beam Measurements
  • Mount a Laser Viewing Card to a Beam Height Ruler
  • Built-In Spirit Level Simplifies Leveling of the Mounted Card or Ruler
  • Laser Engraved with 1.0 mm Graduations
  • Constructed From Black Delrin®

Thorlabs' BHMA1 Mounting Bracket allows two beam height rulers, sold above, to be attached at a 90° angle. This capability allows for alignment of a laser beam horizontally in addition to measuring its height off the table. As shown in the image to the right, the bracket can also be used to attach Laser Viewing Cards to a ruler, allowing for the viewing of UV, NIR, or MIR beams.


Click for Details

BHMA1 Mechanical Drawing

Constructed from durable black Delrin, this bracket contains a built-in spirit level (bubble level) for consistent leveling of the mounted part. When the bubble is centered between the two graduations the bracket is level. When the center of the bubble is under one of the graduations then the bracket is rotated by 31 arcminutes.

Laser engraved 1.0 mm spaced graduations are also included on three sides of the bracket. These markings can be used to indicate how far the mounted part has been translated horizontally or to repeatably add a ruler or viewing card into the setup. 

Two through slots, shown in the drawing to the left, in the bracket are spaced to fit over the top of a BHM1 or BHM2 ruler. Once fitted the bracket is free to translate vertically across the ruler. From here a second ruler or a viewing card is placed in the space between the first ruler and the front of the bracket. Everything is held in place by applying pressure using the thumbscrew on the front of the bracket.

Please Note: These brackets are created from Delrin and are not rated for laser safety.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
BHMA1 Support Documentation
BHMA190° Mounting Bracket for Magnetic Beam Height Rulers
$41.12
Today
Log In  |   My Account  |   Contact Us  |   Careers  |   Privacy Policy  |   Home  |   FAQ  |   Site Index
Regional Websites: West Coast US | Europe | Asia | China | Japan
Copyright 1999-2019 Thorlabs, Inc.
Sales: 1-973-300-3000
Technical Support: 1-973-300-3000


High Quality Thorlabs Logo 1000px:Save this Image