Concave Mirrors: NIR Dielectric Coating (750 - 1100 nm)


  • Focal Lengths from 12 - 1000 mm
  • Ø1/2", Ø1", Ø2", or Ø75 mm
  • Dielectric Coating for 750 - 1100 nm
  • No Chromatic Aberration

CM750-500-E03

Ø75 mm

CM508-150-E03

Ø2"

CM254-100-E03

Ø1"

CM127-050-E03

Ø1/2"

Focus Polychromatic
Beams without
Chromatic Aberration

Related Items


Please Wait
Common Specifications
Available Diameters 1/2", 1", 2", and 75 mm
Dielectric Coating Range 750 - 1100 nm; Ravg >99%
Clear Aperture >90% of Diameter
Surface Quality 20-10 Scratch-Dig
Diameter Tolerance +0.0 / -0.2 mm
Substrate N-BK7a
Backside Surface Fine Ground and Engraved with Part Number
(Not Polished)
  • Click Link for Detailed Specifications on the Substrate
Dielectric Concave Mirrors Selection Guide
UV 350 - 400 nm
Visible 400 - 750 nm 400 - 750 nm, Back Side Polished
NIR 750 - 1100 nm 750 - 1100 nm, Back Side Polished
Telecom 1280 - 1600 nm

See the Concave Mirror Guide tab, above, for our complete selection of concave mirrors.

Features

  • Dielectric Coating Range: 750 - 1100 nm (-E03)
  • Greater than 99% Average Reflectivity in Dielectric Coating Range
  • Four Diameter Options: 1/2", 1", 2", or 75 mm
  • Focal Lengths Range from 12 mm - 1000 mm

Thorlabs' Broadband Dielectric Concave Mirrors are designed for a wide variety of light collection, imaging, and focusing applications. These reflective optics focus light without chromatic aberration, making them especially suitable for broadband sources. With low surface irregularity at 633 nm, these mirrors provide excellent image quality.

All of the mirrors on this page can be mounted by our Precision Kinematic Mirror Mounts.

Thorlabs also offers metallic concave mirrors that operate over a broader wavelength range at the expense of lower reflectivity. Please contact Tech Support for custom versions of these optics.

Optical Coating Guide
Optic Cleaning Tutorial

These plots show the reflectivity of our -E03 dielectric coating for a typical coating run. The shaded region in each graph denotes the spectral range over which the coating is highly reflective. Due to variations in each run, this recommended spectral range is narrower than the actual range over which the optic will be highly reflective. If you have any concerns about the interpretation of this data, please contact Tech Support. For applications that require a mirror that bridges the spectral range between two dielectric coatings, please consider a metallic concave mirror.

Excel Spreadsheet with Raw Data for -E03 Coating, 6° and 45° AOI


Posted Comments:
g xz  (posted 2024-01-17 16:11:57.443)
Dear Thorlabs, I would like to ask about the dispersion size of the mirror CM508-200-E03.Thank you.
jdelia  (posted 2024-01-17 02:14:15.0)
Thank you for contacting Thorlabs. I have reached out to you directly to share our dispersion data for this optic.
Ada Uminska  (posted 2021-12-16 10:57:38.783)
Dear Thorlabs Team, I would like to ask about the concave mirror with dielectric coating for 1064 nm wavelength, with RoC = - 1m, and back side polished. Would you be able to provide such substrate? If is it would be a possibility what would be the lead time and the cost. Thank you, Ada
YLohia  (posted 2021-12-23 01:07:38.0)
Hello Ada, custom items can be requested by clicking on the "Request Quote" button above or by emailing techsales@thorlabs.com. We will discuss the possibility of offering this.
Kwangdong Roh  (posted 2020-03-20 12:34:06.703)
Dear Thorlabs, I am interested in purchasing one of the dielectric concave mirrors. But I am curious whether the backside of the mirror is polished or not. I want to use it as a laser output coupler, so the backside should be polished.
YLohia  (posted 2020-03-20 12:40:46.0)
Hello, thank you for contacting Thorlabs. These are not backside polished. Custom backside polished mirrors and other optics can be requested by emailing techsupport@thorlabs.com.
Jun-Ren Chen  (posted 2020-03-16 02:52:42.5)
hi: For CM254-050-E03, is it possible to order the mirror that the backside is polished? We would like to use two of this mirror to make a fabry-Perot interferometer.
YLohia  (posted 2020-03-16 11:26:57.0)
Hello, thank you for contacting Thorlabs. Custom backside polished mirrors and other optics can be requested by emailing techsupport@thorlabs.com. I have reached out to you directly regarding this.
Reza Amani  (posted 2019-11-08 04:44:20.453)
I needed two of these mirrors for a mini-project. The label on the box was correct but there were CM508-1000-E03 mirrors inside! I wonder why you are using a focal length for curved mirrors while using a radius of curvature is more common. I guess your staff might have thought that 1000 indicates R=1000 mm so it was the correct optic to go in the box. I hope you consider to use the radius of curvature for curved mirrors to avoid such mistakes or at least ask your staff to put correct optics in the boxes. Thank you.
YLohia  (posted 2019-11-07 03:18:46.0)
Hello, thank you for your feedback and our sincere apologies for the packaging error. I have reached out to you directly to gather order information to set up inspected replacements for these mirrors.
Edward Flagg  (posted 2019-08-06 13:07:41.053)
I am interested in obtaining E03 coated concave mirrors that are backside polished. Is this possible? I would also like to know the approximate reflectivity of E03 coating at 632 nm (yes, I know that's not the design wavelength of the coating). Thank you
YLohia  (posted 2019-08-06 02:10:41.0)
Hello, thank you for contacting Thorlabs. The EO3 mirror coating is expected to have a reflectivity of ~92.8% at 632nm at 8deg AOI. The -s and -p reflectivities are ~99% and 97% respectively at 45deg AOI. Note that this is not a formal spec since it is outside of the designed coating range. Please email techsupport@thorlabs.com for custom item quotes. We will reach out to you directly to discuss the possibility of offering this.

Concave Mirrors Options
Mirror Type High-Reflectance Coating Wavelength
UV Enhanced Aluminum 250 - 450 nm
Aluminum 450 nm - 20 µm
Silver 450 nm - 20 µm
Gold 800 nm - 20 µm
E01 Dielectric 350 - 400 nm
E02 Dielectric 400 - 750 nm
E02 Dielectric, Back Side Polished
E03 Dielectric 750 - 1100 nm
E03 Dielectric, Back Side Polished
E04 Dielectric 1280 - 1600 nm
Crystalline 1064 nm, 1156 nm, 1397 nm, or 1550 nm

Concave Mirror Selection Guide

Thorlabs offers concave mirrors with both metallic and dielectric stack reflective coatings. Metallic-coated mirrors offer relatively high reflectance (90-95%) over a wide wavelength range, while dielectric-coated mirrors provide even higher reflectance (>99%) but over a smaller wavelength range. See the table to the right for an overview of the various coatings we offer for our concave mirrors. All coating options are available on optics with diameters ranging from Ø1/2" to Ø75 mm. Metallic mirrors are available with focal lengths from 9.5 - 1000 mm, while dielectric mirrors are available with focal lengths from 12 - 1000 mm.

Below are reflectance plots for our metallic-, dielectric-, and crystalline-coated concave mirrors. To view our selection of mirrors available with a particular coating, either click on the graphed line of interest or the corresponding coating name in the legend. Graphs for the matallic- and dielectrc-coated mirrors are shown for an angle of incidence (AOI) of 8 or 6 degrees. Graphs for the crystalline-coated mirrors are shown for an AOI of 0 degrees.

Metallic Concave Mirror 8 AOI Reflectivity
Click on a particular graphed line or the corresponding name in the legend to view concave mirrors with that coating option.
Metallic-Coated Concave Mirrors are available in UV Enhanced Aluminum, Aluminum, Silver, and Gold.

UV Aluminum (F01) Aluminum (G01) Silver (P01) Gold (M01) UV Aluminum (F01) Aluminum (G01) Silver (P01) Gold (M01)


Concave Dielectric Coated Mirrors

-E02 Coating Range, 8° AOI
Click to Enlarge
Raw Data
Reflectance of -E02 Dielectric-Coated Concave Mirrors at 8° AOI.
These mirrors are also available with a Back Side Polish.
-E04 Coating Range, 6° AOI
Click to Enlarge
Raw Data
Reflectance of -E03 Dielectric-Coated Concave Mirrors at 6° AOI.
These mirrors are also available with a Back Side Polish.

Concave Crystalline Coating Mirrors 

Back to Top

Ø1/2" Broadband Dielectric Concave Mirrors (750 - 1100 nm)

Item # Focal Length Center Thickness Edge Thickness Radius of Curvature Surface Irregularity Thickness Tolerance Reference Drawing
CM127-012-E03 12 mm 3.0 mm 3.8 mm 24.0 mm (0.94") λ/4 @ 633 nm ±0.2 mm Concave Mirror Drawing
CM127-025-E03 25 mm 3.4 mm 50.0 mm (1.97")
CM127-050-E03 50 mm 3.2 mm 100.0 mm (3.94")
Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
CM127-012-E03 Support Documentation
CM127-012-E03Ø1/2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 12 mm
$65.63
Today
CM127-025-E03 Support Documentation
CM127-025-E03Ø1/2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 25 mm
$65.63
Today
CM127-050-E03 Support Documentation
CM127-050-E03Ø1/2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 50 mm
$65.63
Today
Back to Top

Ø1" Broadband Dielectric Concave Mirrors (750 - 1100 nm)

Item # Focal Length Center Thickness Edge Thickness Radius of Curvature Surface Irregularity Thickness Tolerance Reference Drawing
CM254-025-E03 25 mm 6.0 mm 7.6 mm 50.0 mm (1.97") λ/4 @ 633 nm ±0.2 mm Concave Mirror Drawing
CM254-050-E03 50 mm 6.8 mm 100.0 mm (3.94")
CM254-075-E03 75 mm 6.5 mm 150.0 mm (5.91")
CM254-100-E03 100 mm 6.4 mm 200.0 mm (7.87")
CM254-150-E03 150 mm 6.3 mm 300.0 mm (11.81") ≤λ/4 @ 633 nm ±0.1 mm
CM254-200-E03 200 mm 6.2 mm 400.0 mm (15.75")
CM254-250-E03 250 mm 6.2 mm 500.0 mm (19.69")
CM254-500-E03 500 mm 6.1 mm 1000.0 mm (39.37")
CM254-750-E03 750 mm 6.1 mm 1500.0 mm (59.06")
CM254-1000-E03 1000 mm 6.0 mm 2000.0 mm (78.74")
Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
CM254-025-E03 Support Documentation
CM254-025-E03Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 25 mm
$93.55
Today
CM254-050-E03 Support Documentation
CM254-050-E03Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 50 mm
$93.55
Today
CM254-075-E03 Support Documentation
CM254-075-E03Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 75 mm
$93.55
Today
CM254-100-E03 Support Documentation
CM254-100-E03Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 100 mm
$93.55
Today
CM254-150-E03 Support Documentation
CM254-150-E03Customer Inspired! Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 150 mm
$93.55
Today
CM254-200-E03 Support Documentation
CM254-200-E03Customer Inspired! Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 200 mm
$93.55
Today
CM254-250-E03 Support Documentation
CM254-250-E03Customer Inspired! Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 250 mm
$93.55
Today
CM254-500-E03 Support Documentation
CM254-500-E03Customer Inspired! Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 500 mm
$93.55
Today
CM254-750-E03 Support Documentation
CM254-750-E03Customer Inspired! Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 750 mm
$93.55
Today
CM254-1000-E03 Support Documentation
CM254-1000-E03Customer Inspired! Ø1" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 1000 mm
$93.55
Today
Back to Top

Ø2" Broadband Dielectric Concave Mirrors (750 - 1100 nm)

Item # Focal Length Center Thickness Edge Thickness Radius of Curvature Surface Irregularity Thickness Tolerance Reference Drawing
CM508-050-E03 50 mm 9.0 mm 12.2 mm 100.0 mm (3.94") λ/4 @ 633 nm ±0.2 mm Concave Mirror Drawing
CM508-100-E03 100 mm 10.6 mm 200.0 mm (7.87")
CM508-150-E03 150 mm 10.1 mm 300.0 mm (11.81")
CM508-200-E03 200 mm 9.8 mm 400.0 mm (15.75")
CM508-500-E03 500 mm 9.3 mm 1000.0 mm (39.37") ≤λ/4 @ 633 nm ±0.1 mm
CM508-750-E03 750 mm 9.2 mm 1500.0 mm (59.06")
CM508-1000-E03 1000 mm 9.2 mm 2000.0 mm (78.74")
Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
CM508-050-E03 Support Documentation
CM508-050-E03Ø2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 50 mm
$171.36
Today
CM508-100-E03 Support Documentation
CM508-100-E03Ø2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 100 mm
$171.36
Today
CM508-150-E03 Support Documentation
CM508-150-E03Ø2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 150 mm
$171.36
Today
CM508-200-E03 Support Documentation
CM508-200-E03Ø2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 200 mm
$171.36
Today
CM508-500-E03 Support Documentation
CM508-500-E03Customer Inspired! Ø2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 500 mm
$171.36
Today
CM508-750-E03 Support Documentation
CM508-750-E03Customer Inspired! Ø2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 750 mm
$171.36
Today
CM508-1000-E03 Support Documentation
CM508-1000-E03Customer Inspired! Ø2" Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 1000 mm
$171.36
Today
Back to Top

Ø75 mm Broadband Dielectric Concave Mirrors (750 - 1100 nm)

Item # Focal Length Center Thickness Edge Thickness Radius of Curvature Surface Irregularity Thickness Tolerance Reference Drawing
CM750-075-E03 75 mm 12.0 mm 16.7 mm 150.0 mm (5.91") λ/4 @ 633 nm ±0.2 mm Concave Mirror Drawing
CM750-150-E03 150 mm 14.3 mm 300.0 mm (11.81")
CM750-200-E03 200 mm 13.7 mm 400.0 mm (15.75")
CM750-500-E03 500 mm 12.7 mm 1000.0 mm (39.37")
Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
CM750-075-E03 Support Documentation
CM750-075-E03Ø75 mm Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 75 mm
$230.27
Today
CM750-150-E03 Support Documentation
CM750-150-E03Ø75 mm Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 150 mm
$230.27
Today
CM750-200-E03 Support Documentation
CM750-200-E03Ø75 mm Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 200 mm
$230.27
Today
CM750-500-E03 Support Documentation
CM750-500-E03Ø75 mm Dielectric-Coated Concave Mirror, 750 - 1100 nm, f = 500 mm
$230.27
Today