Molded Glass Aspheric Lenses: Uncoated


  • High NA (0.2 to 0.7)
  • Diffraction-Limited Design
  • Collimate or Focus Light with a Single Element

354171

C171TMD

A240

A240TM

A220

Application Idea

Aspheric Lens in a Fiber Launch Application

Related Items


Please Wait
Webpage Features
info icon Click for complete specifications.
Performance Hyperlink Click to view item-specific focal length shift data and spot diagrams at various wavelengths.
Zemax Files
Click on the red Document icon next to the item numbers below to access the Zemax file download. Our entire Zemax Catalog is also available.

Features

  • Molded Glass Aspheric Lenses Designed for Infinite Magnification
  • Focus or Collimate Light Without Introducing Spherical Aberration
  • Available Unmounted or Pre-Mounted in Nonmagnetic 303 Stainless Steel Lens Cells
    Engraved with the Item #

Aspheric lenses are designed to focus or collimate light without introducing spherical aberration into the transmitted wavefront. For monochromatic sources, spherical aberration is often what prevents a single spherical lens from achieving diffraction-limited performance when focusing or collimating light. Thus, an aspheric lens is often the best single element solution for many applications including collimating the output of a fiber or laser diode, coupling light into a fiber, spatial filtering, or imaging light onto a detector.

This page features our selection of uncoated molded glass aspheric lenses. Please note that Thorlabs offers a larger selection of aspheric lenses with one of our AR coatings deposited on both sides (see links in the Aspheric Lens Selection Guide table to the right).

These molded glass lenses are available premounted in nonmagnetic 303 stainless steel lens cells that are engraved with the part number for easy identification. These mounted versions have a metric thread that makes them easy to integrate into an optical setup or OEM application. Mounted aspheres are readily adapted to our SM1 series of lens tubes by using our Aspheric Lens Adapters. They can be used as a drop-in replacement for multi-element microscope objectives by combining the lens with our Microscope Objective Adapter Extension Tube.

If an unmounted aspheric lens is being used to collimate the light from a point source or laser diode, the side with the greater radius of curvature (i.e., the flatter surface) should face the point source or laser diode. To collimate light using one of our mounted aspheric lenses, orient the housing so that the externally threaded end of the mount faces the source.

Molded glass aspheres are manufactured from a variety of optical glasses to yield the indicated performance. The molding process will cause the properties of the glass (e.g., Abbe number) to deviate slightly from those given by glass manufacturers. Specific material properties for each lens can be found by clicking on the Info Icon () in the tables below and selecting the Glass tab.

Choosing a Lens

Aspheric lenses are commonly chosen to couple incident light with a diameter of 1 - 5 mm into a single mode fiber. A simple example will illustrate the key specifications to consider when trying to choose the correct lens.

Example:
Fiber: P1-630A-FC-2
Collimated Beam Diameter Prior to Lens: Ø3 mm

The specifications for the P1-630A-FC-2, 630 nm, FC/PC single mode patch cable indicate that the mode field diameter (MFD) is 4.3 μm. This specification should be matched to the diffraction-limited spot size given by the following equation:

Equation for Diffraction-Limited Spot

Here, f is the focal length of the lens, λ is the wavelength of the input light, and D is the diameter of collimated beam incident on the lens. Solving for the desired focal length of the collimating lens yields

focal length of collimating lens

Thorlabs offers a large selection of mounted and unmounted aspheric lenses to choose from. The aspheric lens with a focal length that is closest to 16 mm has a focal length of 15.29 mm (Item# 354260-B or A260-B). This lens also has a clear aperture that is larger than the collimated beam diameter. Therefore, this aspheric lens is the best option given the initial parameters (i.e., a P1-630A-FC-2 single mode fiber and a collimated beam diameter of 3 mm). Remember, for optimum coupling the spot size of the focused beam must be less than the MFD of the single mode fiber. As a result, if an aspheric lens is not available that provides an exact match, then choose the aspheric lens with a focal length that is shorter than the calculation above yields. Alternatively, if the clear aperture of the aspheric lens is large enough, the beam can be expanded before the aspheric lens, which has the result of reducing the spot size of the focus beam.

Aspheric Lens Design Variables
Click to Enlarge

Reference Drawing

Aspheric Lens Design Formula

Definitions of Variables
z Sag (Surface Profile) as a Function of Y
Y Radial Distance from Optical Axis
R Radius of Curvature
k Conic Constant
An nth Order Aspheric Coefficient

The aspheric surfaces of these lenses may be described using a polynomial expansion in Y, the radial distance from the optical axis. The surface profile or sagitta (often abbreviated as sag) is denoted by z, and is given by the following expression:

where R is the radius of curvature, k is the conic constant, and the An are the nth order aspheric coefficients. The sign of R is determined by whether the center of curvature for the lens surface is located to the right or left of the lens' vertex; a positive R indicates that the center of curvature is located to the right of the vertex, while a negative R indicates that the center of curvature is located to the left of the vertex. For example, the radius of curvature for the left surface of a biconvex lens would be specified as positive, while the radius of curvature for its right surface would be specified as negative.

Aspheric Lens Coefficients

Due to the rotational symmetry of the lens surface, only even powers of Y are contained in the polynomial expansion above. The target values of the aspheric coefficients for each product can be found by clicking either on the blue Info Icons in the tables below (info) or on the red documents icon (docs) next to each lens sold below.

Choosing a Collimation Lens for Your Laser Diode

Since the output of a laser diode is highly divergent, collimating optics are necessary. Aspheric lenses do not introduce spherical aberration and therefore are commonly chosen when the collimated laser beam is to be between one and five millimeters. A simple example will illustrate the key specifications to consider when choosing the correct lens for a given application. The second example below is an extension of the procedure, which will show how to circularize an elliptical beam.

Example 1: Collimating a Diverging Beam

  • Laser Diode to be Used: L780P010
  • Desired Collimated Beam Diameter: Ø3 mm (Major Axis)

When choosing a collimation lens, it is essential to know the divergence angle of the source being used and the desired output diameter. The specifications for the L780P010 laser diode indicate that the typical parallel and perpendicular FWHM beam divergences are 8° and 30°, respectively. Therefore, as the light diverges, an elliptical beam will result. To collect as much light as possible during the collimation process, consider the larger of these two divergence angles in any calculations (i.e., in this case, use 30°). If you wish to convert your elliptical beam into a round one, we suggest using an anamorphic prism pair, which magnifies one axis of your beam; for details, see Example 2 below.

Assuming that the thickness of the lens is small compared to the radius of curvature, the thin lens approximation can be used to determine the appropriate focal length for the asphere. Assuming a divergence angle of 30° (FWHM) and desired beam diameter of 3 mm:

laser diode collimation drawing focal length calculation
Θ = Divergence Angle Ø = Beam Diameter f = Focal Length r = Collimated Beam Radius = Ø/2

Note that the focal length is generally not equal to the needed distance between the light source and the lens.

With this information known, it is now time to choose the appropriate collimating lens. Thorlabs offers a large selection of aspheric lenses. For this application, the ideal lens is a molded glass aspheric lens with focal length near 5.6 mm and our -B antireflection coating, which covers 780 nm. The C171TMD-B (mounted) or 354171-B (unmounted) aspheric lenses have a focal length of 6.20 mm, which will result in a collimated beam diameter (major axis) of 3.3 mm. Next, check to see if the numerical aperture (NA) of the diode is smaller than the NA of the lens:

0.30 = NALens > NADiode ≈ sin(15°) = 0.26

Up to this point, we have been using the full-width at half maximum (FWHM) beam diameter to characterize the beam. However, a better practice is to use the 1/e2 beam diameter. For a Gaussian beam profile, the 1/e2 diameter is almost equal to 1.7X the FWHM diameter. The 1/e2 beam diameter therefore captures more of the laser diode's output light (for greater power delivery) and minimizes far-field diffraction (by clipping less of the incident light).

A good rule of thumb is to pick a lens with an NA twice that of the laser diode NA. For example, either the A390-B or the A390TM-B could be used as these lenses each have an NA of 0.53, which is more than twice the approximate NA of our laser diode (0.26). These lenses each have a focal length of 4.6 mm, resulting in an approximate major beam diameter of 2.5 mm. In general, using a collimating lens with a short focal length will result in a small collimated beam diameter and a large beam divergence, while a lens with a large focal length will result in a large collimated beam diameter and a small divergence.

Example 2: Circularizing an Elliptical Beam

Using the laser diode and aspheric lens chosen above, we can use an anamorphic prism pair to convert our collimated, elliptical beam into a circular beam.

Prism Ray Diagram

Whereas earlier we considered only the larger divergence angle, we now look at the smaller beam divergence of 8°. From this, and using the effective focal length of the A390-B aspheric lens chosen in Example 1, we can determine the length of the semi-minor axis of the elliptical beam after collimation:

r' = f * tan(Θ'/2) = 4.6 mm * tan(4°) = 0.32 mm

The minor beam diameter is double the semi-minor axis, or 0.64 mm. In order to magnify the minor diameter to be equal to the major diameter of 2.5 mm, we will need an anamorphic prism pair that yields a magnification of 3.9. Thorlabs offers both mounted and unmounted prism pairs. Mounted prism pairs provide the benefit of a stable housing to preserve alignment, while unmounted prism pairs can be positioned at any angle to achieve the exact desired magnification. 

The PS883-B mounted prism pair provides a magnification of 4.0 for a 950 nm wavelength beam. Because shorter wavelengths undergo greater magnification when passing through the prism pair, we can expect our 780 nm beam to be magnified by slightly more than 4.0X. Thus, the beam will still maintain a small degree of ellipticity.

Alternatively, we can use the PS871-B unmounted prism pair to achieve the precise magnification of the minor diameter necessary to produce a circular beam. Using the data available here, we see that the PS871-B achieves a magnification of 4.0 when the prisms are positioned at the following angles for a 670 nm wavelength beam:

α1: +34.608° α2: -1.2455°

Refer to the diagram to the right for α1 and α2 definitions. Our 780 nm laser will experience slightly less magnification than a 670 nm beam passing through the prisms at these angles. Some trial and error may be required to achieve the exact desired magnification. In general: 

  • To increase magnification, rotate the first prism clockwise (increasing α1) and rotate the second prism counterclockwise (decreasing α2).
  • To reduce magnification, rotate the first prism counterclockwise (decreasing α1) and rotate the second prism clockwise (increasing α2).
Remember that the prism pair introduces a linear offset between the input and output beams which increases with greater magnification.

Posted Comments:
叶 先生  (posted 2022-07-05 12:13:08.163)
请问:354105-C的激光(能量密度)损伤阈值,最好@1064nm,10ns?
Lawrence Trask  (posted 2021-08-31 10:22:48.2)
Greetings, our group is interested in collimating supercontinuum light out of a fiber (1-2 um). I noticed that all of the aspheric lenses are designed for wavelengths shorter than 1 um. Would it be possible to get an aspheric lens that is designed for 1.55 um, this way the supercontinuum light is better collimated?
azandani  (posted 2021-09-09 04:18:09.0)
Hello Lawrence, thank you for contacting Thorlabs. Custom items can be requested by emailing TechSales@thorlabs.com. That being said, for your application, due to the broadband nature of your light source, an aspheric lens will introduce significant chromatic aberrations. We offer silver coated reflective collimators (https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=4093) that can collimate connectorized fiber-coupled broadband light sources without the effects of chromatic aberration. Another option is to use gold-coated Off-Axis Parabolic mirrors (https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=5447) which would provide the same benefit.
Paul Belden  (posted 2021-08-26 08:54:28.223)
How is the lens in the A240TM held in place? If epoxy is used, is outgassing a concern? Thanks.
YLohia  (posted 2021-08-27 03:10:45.0)
Hello, thank you for contacting Thorlabs. The lens in the A240TM is epoxied to its housing using the Norland 68 epoxy, which is not rated specifically for vacuum-use. Therefore, outgassing would be a concern.
Congli Wang  (posted 2020-10-03 05:02:59.823)
Same here, A6 coefficient is different on this page (-1.30539e-005) and in the Auto CAD PDF (1.3053900E-05). Which one to trust?
YLohia  (posted 2020-10-08 03:03:11.0)
Hello, thank you for contacting Thorlabs and bringing this to our attention. The A6 coefficient should have the negative sign. We will correct this information.
Congli Wang  (posted 2020-10-03 04:50:48.55)
The Aspheric coefficient A6 is not consistent in two different places: (1) On this page, it is mentioned A6 = -0.0001090000. (2) However in the AutoCAD PDF, A6 = 1.0900023E-04. (Notice the missing minus sign as well as the last digits) (2*) If you click on "INFO" on https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=3809, you found A6 = 1.0900023 x 10-4, which is consistent with (2). Which version is correct?
YLohia  (posted 2020-10-08 03:03:09.0)
Hello, thank you for contacting Thorlabs and bringing this to our attention. The A6 coefficient should have the negative sign. 1.0900023E-04 was rounded down to 0.0001090000. We will correct this information.
Chris Manning  (posted 2020-08-31 11:29:15.35)
I'm not sure that all the ones I asked for are here, but this is an impressive document that will benefit someone, if only as an example of the densest spreadsheet ever made: www.hoya-opticalworld.com/common/xls/HOYA20180717.xlsx
Chris Manning  (posted 2020-08-31 10:29:38.817)
I was wondering about the melting points of these (moldable) glasses and their transmission ranges. I am interested in UV cure. It would be a nice touch if the glass names in the product column were hot links to the glass properties that included transmission ranges, melting points, CTE's, etc.
zhuzhanda  (posted 2018-05-28 15:37:35.433)
光纤耦合选透镜焦距时,计算出的衍射极限光斑大小:4*波长*f/(D*Pi),书中衍射公式光斑半径大小为1.22*波长*f/D,二者有和区别和联系
YLohia  (posted 2018-05-29 09:12:36.0)
Hello, thank you for contacting Thorlabs. Our Tech Support China team will reach out to you directly to discuss your request.
AR Coating Abbreviations
Abbreviation Description
U Uncoated: Optics Do Not have an AR Coating
A Broadband AR Coating for the 350 - 700 nm Range
B Broadband AR Coating for the 600 - 1050 nm or 650 - 1050 nm Range
C Broadband AR Coating for the 1050 - 1620 nm or 1050 - 1700 nm Range
V Narrowband AR Coating Designed for the Wavelength Listed in the Table Below

The table below contains all molded visible and near-IR aspheric lenses offered by Thorlabs. For our selection of IR molded aspheres, click here. The Item # listed is that of the unmounted, uncoated lens. An "X" in any of the five AR Coating Columns indicates the lens is available with that coating (note that the V coating availability is indicated with the AR coating wavelength). The table to the right defines each letter and lists the specified AR coating range. Clicking on the X takes you to the landing page where that lens (mounted or unmounted) can be purchased.

Base Item # AR Coating Options Effective
Focal Length
NA Outer Diameter of
Unmounted Lens
Working Distance Clear Aperture of
Unmounted Lens
U A B C V Unmounted Mounted
355465 X   0.5 mm S1: 0.50
S2: 0.10
1.845 mm S1: 0.3 mma
S2: 2.9 mma
- S1: Ø0.40 mm
S2: Ø0.70 mm
355915 X   0.8 mm S1: 0.50
S2: 0.12
1.300 mm S1: 0.7 mma
S2: 3.9 mma
- S1: Ø0.77 mm
S2: Ø1.00 mm
355200 X   1.1 mm S1: 0.43
S2: 0.12
2.400 mm S1: 0.5 mmb
S2: 4.8 mma
- S1: Ø1.24 mm
S2: Ø1.24 mm
355201 X   1.1 mm S1: 0.12
S2: 0.43
4.929 mm S1: 0.5 mmb
S2: 4.8 mma
- S1: Ø1.24 mm
S2: Ø1.24 mm
354450 X   1.2 mm S1: 0.30
S2: 0.30
1.800 mm S1: 1.7 mma
S2: 1.7 mma
- S1: Ø1.14 mm
S2: Ø1.14 mm
354710 X X X X   1.5 mm 0.5 2.650 mm 0.5 mmb 0.4 mmb,c S1: Ø1.15 mm
S2: Ø1.50 mm
354140 X X X X   1.5 mm 0.6 2.400 mm 0.8 mma 0.8 mma S1: Ø1.14 mm
S2: Ø1.60 mm
355755 X   1.9 mm S1: 0.15
S2: 0.15
1.700 mm S1: 3.6 mma
S2: 3.6 mma
- S1: Ø1.10 mm
S2: Ø1.10 mm
355151 X X X X   2.0 mm 0.5 3.000 mm 0.5 mmb 0.3 mmb,c S1: Ø1.09 mm
S2: Ø2.00 mm
355440 X X X X   2.8 mm S1: 0.3
S2: 0.5
4.700 mm S1: 2.0 mmb
S2: 7.1 mma
S1: 1.8 mmb,c
S2: 7.09 mma
S1: Ø3.76 mm
S2: Ø4.12 mm
355392 X X X X   2.8 mm 0.6 4.000 mm 1.5 mma 1.0 mma,c S1: Ø2.50 mm
S2: Ø3.60 mm
355390 X X X X   2.8 mm 0.6 4.500 mm 2.2 mma 2.0 mma,c S1: Ø3.60 mm
S2: Ø3.60 mm
355660 X X X X   3.0 mm 0.5 4.000 mm 1.6 mma 1.3 mma,c S1: Ø2.35 mm
S2: Ø3.60 mm
354330 X X X X   3.1 mm 0.7 6.325 mm 1.8 mma 1.8 mma,c S1: Ø3.84 mm
S2: Ø5.00 mm
N414   X X X   3.30 mm 0.47 4.50 mm 1.94 mma 1.83 mma,c Ø3.52 mm
354340 X X X     4.0 mm 0.6 6.325 mm 1.48 mmb 1.2 mmb,c S1: Ø3.77 mm
S2: Ø5.10 mm
357610 X X X 4.0 mm 0.6 6.325 mm 1.5 mmb 1.1 mmb,c S1: Ø3.39 mm
S2: Ø4.80 mm
357775 X X X   405 4.0 mm 0.6 6.325 mm 1.9 mmb 1.5 mmb,c S1: Ø3.45 mm
S2: Ø4.80 mm
354350 X   X X   4.5 mm 0.4 4.700 mm 2.2 mma 1.6 mma,c S1: Ø2.05 mm
S2: Ø3.70 mm
355230 X X X X 1064 4.5 mm 0.6 6.325 mm 2.8 mmb 2.4 mmb,c S1: Ø3.93 mm
S2: Ø5.07 mm
A230 X X X X   4.51 mm 0.55 6.34 mm 2.91 mma 2.53 mma,c Ø4.95 mm
354453 X X X X 4.6 mm 0.5 6.000 mm 2.0 mmb 0.9 mmb,c S1: Ø3.38 mm
S2: Ø4.80 mm
A390   X X     4.60 mm 0.53 6.00 mm 2.70 mma 1.64 mma,c Ø4.89 mm
354430 X   X X   5.0 mm 0.2 2.000 mm 4.4 mma 4.0 mma,c S1: Ø1.40 mm
S2: Ø1.60 mm
354105 X X X X 5.5 mm 0.6 7.200 mm 3.1 mmb 2.0 mmb,c S1: Ø4.96 mm
S2: Ø6.00 mm
354171 X X X X   6.2 mm 0.3 4.700 mm 3.4 mmb 2.8 mmb,c S1: Ø2.72 mm
S2: Ø3.70 mm
355110 X X X X 1064 6.2 mm 0.4 7.200 mm 2.7 mmb 1.6 mmb,c S1: Ø2.93 mm
S2: Ø5.00 mm
A110 X X X X   6.24 mm 0.40 7.20 mm 3.39 mma 2.39 mma,c Ø5.00 mm
A375   X X X   7.50 mm 0.30 6.51 mm 5.90 mma 5.59 mma,c Ø4.50 mm
354240 X X X X 1064 8.0 mm 0.5 9.950 mm 4.9 mmb 3.8 mmb,c S1: Ø6.94 mm
S2: Ø8.00 mm
A240 X X X X   8.00 mm 0.50 9.94 mm 5.92 mma 4.79 mma,c Ø8.00 mm
354060 X X X X 9.6 mm 0.3 6.325 mm 7.5 mmb 7.1 mmb,c S1: Ø5.13 mm
S2: Ø5.20 mm
354061 X X X X 11.0 mm 0.2 6.325 mm 8.9 mmb 8.5 mmb,c S1: Ø4.63 mm
S2: Ø5.20 mm
A220 X X X     11.00 mm 0.26 7.20 mm 7.97 mma 6.91 mma,c Ø5.50 mm
354220 X X X X 1064 11.0 mm 0.3 7.200 mm 6.9 mmb 5.8 mmb,c S1: Ø4.07 mm
S2: Ø5.50 mm
355397 X X X X 11.0 mm 0.3 7.200 mm 9.3 mmb 8.2 mmb,c S1: Ø6.24 mm
S2: Ø6.68 mm
A397   X X X   11.00 mm 0.30 7.20 mm 9.64 mma 8.44 mma,c Ø6.59 mm
354560 X X X X   13.86 mm 0.2 6.325 mm 12.1 mma 11.7 mma,c S1: Ø4.54 mm
S2: Ø5.10 mm
A260   X X X   15.29 mm 0.16 6.50 mm 14.09 mma 13.84 mma,c Ø5.00 mm
354260 X X X X   15.3 mm 0.2 6.500 mm 12.7 mmb 12.4 mmb,c S1: Ø4.61 mm
S2: Ø5.00 mm
A280   X X X   18.40 mm 0.15 6.50 mm 17.13 mma 16.88 mma,c Ø5.50 mm
354280 X X X X 1064 18.4 mm 0.15 6.500 mm 15.9 mmb 15.6 mmb,c S1: Ø5.15 mm
S2: Ø5.50 mm
  • This working distance is measured to the focal point.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount
Back to Top

EFL = 1.5 mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354710 info 1.5 mm 0.53 2.650 mm 0.5 mmd S1: Ø1.15 mm
S2: Ø1.50 mm
0.863 mm 1550 nm 0.250 mm D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C710TMD 6.2 mm 0.4 mmd,e M6 x 0.5 SPW306
354140 info
1.5 mm  0.58 2.400 mm 0.8 mmf S1: Ø1.14 mm
S2: Ø1.60 mm
1.020 mm 780 nm - D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C140TMD 6.2 mm M6 x 0.5 SPW306

OD = Outer Diameter
LWT = Laser Window Thickness

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount
  • This working distance is measured to the focal point.
Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354710 Support Documentation
354710f = 1.5 mm, NA = 0.53, WD = 0.5 mm, DW = 1550 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C710TMD Support Documentation
C710TMDf = 1.5 mm, NA = 0.53, WD = 0.4 mm, DW = 1550 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
354140 Support Documentation
354140f = 1.5 mm, NA = 0.58, WD = 0.8 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C140TMD Support Documentation
C140TMDf = 1.5 mm, NA = 0.58, WD = 0.8 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
Back to Top

EFL = 2.xx mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
355151 info
2.0 mm 0.50 3.000 mm 0.5 mmd S1: Ø1.09 mm
S2: Ø2.00 mm 
1.892 mm 780 nm 0.250 mm D-ZLaF52LA Focal Shift /
Spot Size Cross Section
- -
C151TMD 6.2 mm 0.3 mmd,e M6 x 0.5 SPW306
355440 info 2.8 mm S1: 0.26
S2: 0.52
4.700 mm S1: 2.0 mmd
S2: 7.1 mmd
S1: Ø3.76 mm
S2: Ø4.12 mm
3.827 mm 980 nm 0.250 mm D-ZLaF52LA Focal Shift /
Spot Size Cross Section
- -
C440TMD 8.2 mm S1: 1.9 mmd,e
M8 x 0.5 SPW308
355392 info 2.8 mm 0.60 4.000 mm 1.5 mmf S1: Ø2.50 mm
S2: Ø3.60 mm
2.240 mm 830 nm - D-ZLaF52LA 392_Asph.pdf - -
C392TMD 6.2 mm 1.0 mme,f M6 x 0.5 SPW306
355390 info 2.8 mm 0.55 4.500 mm 2.2 mmf S1: Ø3.60 mm
S2: Ø3.60 mm
1.900 mm 830 nm - D-ZLaF52LA 390_Asph.pdf - -
C390TMD 8.2 mm 2.0 mme,f M8 x 0.5 SPW308
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount
  • This working distance is measured to the focal point.

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
355151 Support Documentation
355151f= 2.0 mm, NA = 0.50, WD = 0.5 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C151TMD Support Documentation
C151TMDf= 2.0 mm, NA = 0.50, WD = 0.3 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
355440 Support Documentation
355440f= 2.8 mm, NA = 0.26/0.52, WD = 2.0/7.1 mm, DW = 980 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C440TMD Support Documentation
C440TMDf = 2.8 mm, NA = 0.26/0.52, WD = 1.9 mm, DW = 980 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
355392 Support Documentation
355392f= 2.8 mm, NA = 0.60, WD = 1.5 mm, DW = 830 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C392TMD Support Documentation
C392TMDf = 2.8 mm, NA = 0.60, WD = 1.0 mm, DW = 830 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
355390 Support Documentation
355390f= 2.8 mm, NA = 0.55, WD = 2.2 mm, DW = 830 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C390TMD Support Documentation
C390TMDf = 2.8 mm, NA = 0.55, WD = 2.0 mm, DW = 830 nm, Mounted Aspheric Lens, Uncoated
$77.20
Lead Time
Back to Top

EFL = 3.x mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
355660 info 3.0 mm 0.52 4.000 mm 1.6 mmd S1: Ø2.35 mm
S2: Ø3.60 mm
2.500 mm 1550 nm - D-ZLaF52LA 660_Asph.pdf - -
C660TMD 8.2 mm 1.3 mmd,e M8 x 0.5 SPW308
354330 info
3.1 mm 0.70 6.325 mm 1.8 mmd S1: Ø3.84 mm
S2: Ø5.00 mm
3.214 mm 830 nm - D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C330TMD 9.2 mm 1.8 mmd,e M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the focal point.
  • Measured from the Mount

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
355660 Support Documentation
355660f= 3.0 mm, NA = 0.52, WD = 1.6 mm, DW = 1550 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C660TMD Support Documentation
C660TMDf = 3.0 mm, NA = 0.52, WD = 1.3 mm, DW = 1550 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
354330 Support Documentation
354330f= 3.1 mm, NA = 0.70, WD = 1.8 mm, DW = 830 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C330TMD Support Documentation
C330TMDf= 3.1 mm, NA = 0.70, WD = 1.8 mm, DW = 830 nm, Mounted Aspheric Lens, Uncoated
$80.98
3 Weeks
Back to Top

EFL = 4.xx mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354340 info 4.0 mm 0.64 6.325 mm 1.5 mmd S1: Ø3.77 mm
S2: Ø5.10 mm
3.097 mm 685 nm 1.200 mm D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C340TMD 9.2 mm 1.2 mmd,e M9 x 0.5 SPW301
357610 info 4.0 mm 0.62 6.325 mm 1.5 mmd S1: Ø3.39 mm
S2: Ø4.80 mm
2.953 mm 410 nm 1.200 mm D-LAK6 Focal Shift /
Spot Size Cross Section
- -
C610TMD 9.2 mm 1.1 mmd,e M9 x 0.5 SPW301
357775 info 4.0 mm 0.60 6.325 mm 1.9 mmd S1: Ø3.45 mm
S2: Ø4.80 mm
2.898 mm 408 nm 0.250 mm D-LAK6 Focal Shift
Spot Size Cross Section
- -
C775TMD 9.2 mm 1.5 mmd,e M9 x 0.5 SPW301
354350 info 4.5 mm 0.40 4.700 mm 2.2 mmf S1: Ø2.05 mm
S2: Ø3.70 mm
3.649 mm 980 nm - D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C350TMD 8.2 mm 1.6 mme,f M8 x 0.5 SPW308
355230 info
4.5 mm 0.55 6.325 mm 2.8 mmd S1: Ø3.93 mm
S2: Ø5.07 mm
2.708 mm 780 nm 0.250 mm D-ZLaF52LA Focal Shift /
Spot Size Cross Section
- -
C230TMD 9.2 mm 2.4 mmd,e M9 x 0.5 SPW301
A230 info 4.51 mm 0.55 6.34 mm 2.91 mmf Ø4.95 mm 2.94 mm 780 nm 0.25 mm S-NPH1 A230_Asph.pdf - -
354453 info
4.6 mm 0.50 6.000 mm 2.0 mmd S1: Ø3.38 mm
S2: Ø4.80 mm
3.135 mm 655 nm 0.275 mm D-ZK3 Focal Shift /
 Spot Size Cross Section
- -
C453TMD 9.2 mm 0.9 mmd,e M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount
  • This working distance is measured to the focal point.

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354340 Support Documentation
354340f= 4.0 mm, NA = 0.64, WD = 1.5 mm, DW = 685 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C340TMD Support Documentation
C340TMDf= 4.0 mm, NA = 0.64, WD = 1.2 mm, DW = 685 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
357610 Support Documentation
357610f = 4.0 mm, NA = 0.62, WD = 1.5 mm, DW = 410 nm, Unmounted Aspheric Lens, Uncoated
$82.50
3-5 Days
C610TMD Support Documentation
C610TMDf = 4.0 mm, NA = 0.62, WD = 1.1 mm, DW = 410 nm, Mounted Aspheric Lens, Uncoated
$100.36
3-5 Days
357775 Support Documentation
357775f = 4.0 mm, NA = 0.60, WD = 1.9 mm, DW = 408 nm, Unmounted Aspheric Lens, Uncoated
$82.50
3-5 Days
C775TMD Support Documentation
C775TMDf = 4.0 mm, NA = 0.60, WD = 1.5 mm, DW = 408 nm, Mounted Aspheric Lens, Uncoated
$100.36
3-5 Days
354350 Support Documentation
354350f= 4.5 mm, NA = 0.40, WD = 2.2 mm, DW = 980 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C350TMD Support Documentation
C350TMDf= 4.5 mm, NA = 0.40, WD = 1.6 mm, DW = 980 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
355230 Support Documentation
355230f= 4.5 mm, NA = 0.55, WD = 2.8 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C230TMD Support Documentation
C230TMDf= 4.5 mm, NA = 0.55, WD = 2.4 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
A230 Support Documentation
A230f = 4.51 mm, NA = 0.55, WD = 2.91 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$86.43
Volume Pricing
3-5 Days
354453 Support Documentation
354453f= 4.6 mm, NA = 0.50, WD = 2.0 mm, DW = 655 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C453TMD Support Documentation
C453TMDf = 4.6 mm, NA = 0.50, WD = 0.9 mm, DW = 655 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
Back to Top

EFL = 5.x mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354430 info
5.0 mm 0.15 2.000 mm 4.4 mmd S1: Ø1.40 mm
S2: Ø1.60 mm
0.991 mm 1550 nm - D-ZK3 430_Asph.pdf - -
C430TMD 6.2 mm 4.0 mmd,e M6 x 0.5 SPW306
354105 info
5.5 mm 0.60 7.200 mm 3.1 mmf S1: Ø4.96 mm
S2: Ø6.00 mm
2.937 mm 633 nm 0.250 mm D-ZK3 Focal Shift /
 Spot Size Cross
Section
- -
C105TMD 9.2 mm 2.0 mme,f M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the focal point.
  • Measured from the Mount
  • This working distance is measured to the front of the window of the laser diode being collimated.

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354430 Support Documentation
354430f= 5.0 mm, NA = 0.15, WD = 4.4 mm, DW = 1550 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C430TMD Support Documentation
C430TMDf = 5.0 mm, NA = 0.15, WD = 4.0 mm, DW = 1550 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
354105 Support Documentation
354105f= 5.5 mm, NA = 0.60, WD = 3.1 mm, DW = 633 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C105TMD Support Documentation
C105TMDf= 5.5 mm, NA = 0.60, WD = 2.0 mm, DW = 633 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
Back to Top

EFL = 6.xx mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354171 info
6.2 mm 0.30 4.700 mm 3.4 mmd S1: Ø2.72 mm
S2: Ø3.70 mm
3.484 mm 633 nm 0.275 mm D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C171TMD 8.2 mm 2.8 mmd,e M8 x 0.5 SPW308
355110 info 6.2 mm 0.40 7.200 mm 2.7 mmd S1: Ø2.93 mm
S2: Ø5.00 mm
5.158 mm 780 nm 0.275 mm D-ZLaF52LA Focal Shift /
Spot Size Cross Section
- -
C110TMD 9.2 mm 1.6 mmd,e M9 x 0.5 SPW301
A110 info 6.24 mm 0.40 7.20 mm 3.39 mmf Ø5.00 mm 5.36 mm 780 nm 0.275 mm H-LAK54 A110_Asph.pdf - -
A110TM 9.24 mm 2.39 mme,f M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount
  • This working distance is measured to the focal point.

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354171 Support Documentation
354171f= 6.2 mm, NA = 0.30, WD = 3.4 mm, DW = 633 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C171TMD Support Documentation
C171TMDf= 6.2 mm, NA = 0.30, WD = 2.8 mm, DW = 633 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
355110 Support Documentation
355110f= 6.2 mm, NA = 0.40, WD = 2.7 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$90.76
3-5 Days
C110TMD Support Documentation
C110TMDf= 6.2 mm, NA = 0.40, WD = 1.6 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$107.45
3-5 Days
A110 Support Documentation
A110f = 6.24 mm, NA = 0.40, WD = 3.39 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$86.43
Volume Pricing
3-5 Days
A110TM Support Documentation
A110TMf = 6.24 mm, NA = 0.40, WD = 2.39 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$92.36
Volume Pricing
3-5 Days
Back to Top

EFL = 8.0x mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354240 info
8.0 mm 0.50 9.936 mm 4.9 mmd S1: Ø6.94 mm
S2: Ø8.00 mm
3.434 mm 780 nm 0.250 mm D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C240TMD 12.2 mm 3.8 mmd,e M12 x 0.5 SPW302
A240 info 8.00 mm 0.50 9.94 mm 5.92 mmf Ø8.00 mm 3.69 mm 780 nm 0.25 mm D-LAK6 A240_Asph.pdf - -
A240TM 12.24 mm 4.79 mme,f M12 x 0.5 SPW302
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount
  • This working distance is measured to the focal point.

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354240 Support Documentation
354240f= 8.0 mm, NA = 0.50, WD = 4.9 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$107.96
3-5 Days
C240TMD Support Documentation
C240TMDf= 8.0 mm, NA = 0.50, WD = 3.8 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$124.64
3-5 Days
A240 Support Documentation
A240f = 8.00 mm, NA = 0.50, WD = 5.92 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$86.43
Volume Pricing
3-5 Days
A240TM Support Documentation
A240TMf = 8.00 mm, NA = 0.50, WD = 4.79 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$92.36
Volume Pricing
3-5 Days
Back to Top

EFL = 9.6 mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354060 info
9.6 mm 0.27 6.325 mm 7.5 mmd S1: Ø5.13 mm
S2: Ø5.20 mm
2.493 mm 633 nm 0.250 D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C060TMD 9.2 mm 7.1 mmd,e M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354060 Support Documentation
354060f= 9.6 mm, NA = 0.27, WD = 7.5 mm, DW = 633 nm, Unmounted Aspheric Lens, Uncoated
$60.53
Lead Time
C060TMD Support Documentation
C060TMDf= 9.6 mm, NA = 0.27, WD = 7.1 mm, DW = 633 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
Back to Top

EFL = 11.0x mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354061 info
11.0 mm 0.24 6.330 mm 8.9 mmd S1: Ø4.63 mm
S2: Ø5.20 mm
2.434 mm 633 nm 0.250 mm D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C061TMD 9.2 mm 8.5 mmd,e M9 x 0.5 SPW301
A220 info 11.00 mm 0.26 7.20 mm 7.97 mmf Ø5.50 mm 5.00 mm 633 nm 0.25 mm D-K59 A220_Asph.pdf - -
A220TM 9.24 mm 6.91 mme,f 0.275 mm M9 x 0.5 SPW301
354220 info 11.0 mm 0.25 7.200 mm 6.9 mmd S1: Ø4.07 mm
S2: Ø5.50 mm
5.032 mm 633 nm 0.250 mm D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C220TMD 9.2 mm 5.8 mmd,e M9 x 0.5 SPW301
355397 info 11.0 mm 0.30 7.200 mm 9.3 mmd S1: Ø6.24 mm
S2: Ø6.68 mm
1.947 mm 670 nm 0.275 mm D-ZLaF52LA Focal Shift / 
Spot Size Cross Section
- -
C397TMD 9.2 mm 8.2 mmd,e M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount
  • This working distance is measured to the focal point.

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354061 Support Documentation
354061f= 11.0 mm, NA = 0.24, WD = 8.9 mm, DW = 633 nm, Unmounted Aspheric Lens, Uncoated
$90.76
3-5 Days
C061TMD Support Documentation
C061TMDf= 11.0 mm, NA = 0.24, WD = 8.5 mm, DW = 633 nm, Mounted Aspheric Lens, Uncoated
$107.45
3-5 Days
A220 Support Documentation
A220f = 11.0 mm, NA = 0.26, WD = 7.97 mm, DW = 633 nm, Unmounted Aspheric Lens, Uncoated
$86.43
Volume Pricing
3-5 Days
A220TM Support Documentation
A220TMf = 11.0 mm, NA = 0.26, WD = 6.91 mm, DW = 633 nm, Mounted Aspheric Lens, Uncoated
$92.36
Volume Pricing
3-5 Days
354220 Support Documentation
354220f= 11.0 mm, NA = 0.25, WD = 6.9 mm, DW = 633 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C220TMD Support Documentation
C220TMDf= 11.0 mm, NA = 0.25, WD = 5.8 mm, DW = 633 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
355397 Support Documentation
355397f= 11.0 mm, NA = 0.30, WD = 9.3 mm, DW = 670 nm, Unmounted Aspheric Lens, Uncoated
$60.53
3-5 Days
C397TMD Support Documentation
C397TMDf = 11.0 mm, NA = 0.30, WD = 8.2 mm, DW = 670 nm, Mounted Aspheric Lens, Uncoated
$77.20
3-5 Days
Back to Top

EFL = 13.xx mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354560 info
13.9 mm 0.18 6.325 mm 12.1 mmd S1: Ø4.54 mm
S2: Ø5.10 mm
2.773 mm 650 nm - D-ZK3 560_Asph.pdf - -
C560TMD 9.2 mm 11.7 mmd,e M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the focal point.
  • Measured from the Mount

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354560 Support Documentation
354560f= 13.9 mm, NA = 0.18, WD = 12.1 mm, DW = 650 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C560TMD Support Documentation
C560TMDf = 13.9 mm, NA = 0.18, WD = 11.7 mm, DW = 650 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
Back to Top

EFL = 15.3 mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354260 info
15.3 mm 0.16 6.500 mm 12.7 mmd S1: Ø4.61 mm
S2: Ø5.00 mm
2.209 mm 780 nm 0.250 D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C260TMD 9.2 mm 12.4 mmd,e M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354260 Support Documentation
354260f= 15.3 mm, NA = 0.16, WD = 12.7 mm, Unmounted Aspheric Lens, DW = 780 nm, Uncoated
$64.29
3-5 Days
C260TMD Support Documentation
C260TMDf= 15.3 mm, NA = 0.16, WD = 12.4 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days
Back to Top

EFL = 18.4 mm

Item #
(Unmounted/
Mounted)
Info EFLa NA OD WDb CA TC DW LWTc Glass Performance Thread Suggested
Spanner Wrench
354280 info
18.4 mm 0.15 6.500 mm 15.9 mmd S1: Ø5.15 mm
S2: Ø5.50 mm
2.178 mm 780 nm 0.250 D-ZK3 Focal Shift /
Spot Size Cross Section
- -
C280TMD 9.2 mm 15.6 mmd,e M9 x 0.5 SPW301
  • EFL is specified at the design wavelength for the unmounted lens.
  • WD is specified at the design wavelength.
  • Lenses with an LWT specification are designed for laser diode collimation; in these cases, the NA, WD, and wavefront are defined based on the presence of a laser window (not included) of the indicated thickness.
  • This working distance is measured to the front of the window of the laser diode being collimated.
  • Measured from the Mount

EFL = Effective Focal Length
NA = Numerical Aperture
CA = Clear Aperture

WD = Working Distance
DW = Design Wavelength
TC = Center Thickness

OD = Outer Diameter
LWT = Laser Window Thickness

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
354280 Support Documentation
354280f= 18.4 mm, NA = 0.15, WD = 15.9 mm, DW = 780 nm, Unmounted Aspheric Lens, Uncoated
$64.29
3-5 Days
C280TMD Support Documentation
C280TMDf= 18.4 mm, NA = 0.15, WD = 15.6 mm, DW = 780 nm, Mounted Aspheric Lens, Uncoated
$80.98
3-5 Days