Mini-Series Fixed Mirror Mounts

Overview
Feedback

MFM7 with Ø7 mm Silver Mirror Mounted on Ø6 mm Post

Item #	Qty	Description
Imperial Product List
MFM7	1	Mini-Series Fixed Ø7 mm Mirror Mount, 4-40 Tap
PF03-03-P01	1	Ø7.0 mm Protected Silver Mirror
MS2R	1	Mini-Series Optical Post, Ø6 mm, L = 2"
MPH50	1	Pedestal-Base Mini-Series Post Holder with Flexure Clamp, 50 mm (1.97") Tall
MBA1	1	Mini-Series Pedestal Post Holder Base, #8 (M4) Slot
MSB12	1	12" x 12" x 3/8" Mini-Series Aluminum Breadboard, 8-32 and 1/4"-20 High-Density Taps

View Metric Product List

Item #	Qty	Description
Metric Product List
MFM7/M	1	Mini-Series Fixed Ø7 mm Mirror Mount, M3 Tap
PF03-03-P01	1	Ø7.0 mm Protected Silver Mirror
MS2R/M	1	Mini-Series Optical Post, Ø6 mm, L = 50 mm
MPH50	1	Pedestal-Base Mini-Series Post Holder with Flexure Clamp, 50 mm (1.97") Tall
MBA1	1	Mini-Series Pedestal Post Holder Base, #8 (M4) Slot
MS12B/M	1	300 mm x 300 mm x 9.5 mm Mini-Series Aluminum Breadboard, M3 High-Density Taps

MFM7 Post-Mounted to Aluminum Breadboard

Item #	Optic Size	Min Optic Thickness	Clear Aperture
MFM7(/M)	Ø7 mm	0.04" (1.0 mm)	Ø0.24" (Ø6.0 mm)
MFM10(/M)	Ø10 mm	0.04" (1.0 mm)	Ø0.35" (Ø8.8 mm)
MFM05(/M)	Ø1/2"	0.14" (3.6 mm)	Ø0.47" (Ø11.9 mm)

Features

Double-Bored Optic Mount with Nylon-Tipped Setscrew
Mounts for Three Optic Diameters from Ø7 mm to Ø1/2" (Ø12.5 mm)
10 mm Optical Axis Height Matches Mini-Series Kinematic Mounts
4-40 (M3) Tap for Post Mounting
Nylon-Tipped Locking Setscrew

Our Mini-Series Fixed Mirror Mounts are available for Ø7 mm, Ø10 mm, or Ø1/2" optics. They feature a double-bored mounting area that provides two stable lines of contact. The rear of the optic rests against a small lip, and the optic is secured by a nylon-tipped setscrew which can be actuated by a 0.05" balldriver or hex key on the imperial mounts or a 1.5 mm balldriver or hex key on the metric mounts. These mounts are designed to provide a 10 mm optic axis height when measured from the bottom of the mount to match our Mini-Series Kinematic Mounts. The MFM05(/M) is also compatible with Ø12.5 mm optics, but the optic will not be centered in the mount. A bottom-located 4-40 (M3) tapped hole is provided to mount directly to our Ø6 mm Mini-Series posts or Ø12 mm pedestal posts. Our Mini-Series post holders allow our Ø6 mm posts to be mounted onto our Mini-Series breadboards.

Posted Comments:
Ilya R (posted 2020-08-14 11:05:54.887) Hello, What is the thread of the nylon-tipped setscrew in the MFM05/M? It is unfortunately not specified in the AutoCAD drawing. Thank you. YLohia (posted 2020-08-14 11:25:06.0) Hello Ilya, thank you for contacting Thorlabs. The MFM05/M contains an M3 x 0.5, 3mm long, nylon tipped set screw.

View All »Matching Part Numbers

Mini-Series Fixed Mirror Mounts

Features

Mini-Series Fixed Mirror Mounts