"; _cf_contextpath=""; _cf_ajaxscriptsrc="/cfthorscripts/ajax"; _cf_jsonprefix='//'; _cf_websocket_port=8578; _cf_flash_policy_port=1244; _cf_clientid='FADED625AA6ABE2631AC87121340B2B8';/* ]]> */
| |||||||||||||||||
Manual Drives, Adapters![]()
Assembly of DRV3 MCA1 RBA1 ![]() Please Wait Modular Quick Connect Adapters allow modular actuators to be fitted to stages with standard mounting clamps as shown above. See the Solutions tab for an overview of how the modular connections system works. Barrel adapters allow actuators with Ø3/8", Ø9.5 mm, and Ø10 mm mounting barrels to be fitted to stages designed to accept Ø1/2" barrels. These are ideal when fitting actuators such as the DC servo motor actuators to the LNR Series Stages. They may also be used to adapt micrometer heads for use with Ø1/2" optical post accessories, as shown in the photo to the right.
How the Modular Connections System Works:
How the Modular Quick Connect Adapters are Used: ![]() How the Mounting Barrel Adapters are Used: ![]() ![]()
![]()
These slotted brass sleeves are an ideal solution for securing Ø3/8" and Ø10 mm mounting barrels into components designed for Ø1/2" barrels. The slotted sleeve allows externally applied clamping force to be transferred to the mounting barrel. ![]()
Modular quick connect adapters allow modular actuators to be fitted to stages with standard mounting clamps as shown above. See the Solutions tab for an overview on how the modular connections system works. | |||||||||||||||||
|