Multi-Axis Flexure Stage Accessories: Extension Platforms


  • Designed for Use with Our Family of Multi-Axis Stages
  • Free-Standing and Stage-Mounted Mounting Plates
  • Compatible with a Wide Range of Accessories 

Fixed
Angle
Brackets

Platform
Extension
Plates

Moving Angle
Bracket

AMA029A

62.5 mm Height

AMA029C

81.5 mm Height

Fixed Platform
Assemblies

6-Axis Flexure Stage
with an FSC102 Force Sensor
Being Used with the
AMA029D Post Assembly

Related Items


Please Wait

This page features our complete line of fixed or moving extension platforms that are compatible with our Microblock™, RollerBlock™, and NanoMax™ flexure stages. These items are useful when constructing complex optical systems.


Posted Comments:
cpinyan  (posted 2018-08-30 14:36:01.12)
I would like to see an AMA extension platform that had holes compatible with the fiber bench components or that allowed attaching a fiber bench to the side of a stage. The fiber bench has several great holders for small parts and it would allow for close alignment of a ferrule or collimator.
AManickavasagam  (posted 2018-09-03 09:24:47.0)
Thanks for your feedback. I will pass this to the engineer in-charge and also post on our Internal forum.
demis  (posted 2013-12-18 11:52:51.613)
Hello, I just wanted to alert you that it took me forever to finally find this page listing Flexure Platforms. ("Multi-Axis Flexure Stage Accessories: Platforms": http://www.thorlabs.us/newgrouppage9.cfm?objectgroup_id=1170&pn=MMP1#131 ) I believe the issue is that, even though it shows "Accessories for Flexure Stages" in the Breadcrumbs to this page, the page is Not listed under the parent category page at http://www.thorlabs.us/navigation.cfm?guide_id=144 . You could make this a lot easier by listing "Multi-Axis Flexure Stage Accessories: Platforms" on the "Accessories for Flexure Stages" page. Thanks, -- Demis
lmorgus  (posted 2013-12-18 05:22:54.0)
Response from Laurie at Thorlabs to Demis: Thanks so much for taking the time to point out a navigational difficulty you had on our website. I have taken a look at the web page for our MMP1 as well as the guide page that leads there, and I fully agree that an update/improvement should be made. Currently our “Extension Platform” box leads to this page, but I can totally see how you wouldn’t expect to find “Top Plates” under that box. I think the best option might be to break the current page into two pages, one for “Extension Platforms” and another for “Top Plates” such as the MMP1 you were looking for. We will look to implement these changes over the next several days. Thanks again for the feedback!
Back to Top

Flexure Stage Accessories: Fixed Platform Brackets

AMA003 Application Image
Click to Enlarge

AMA007 Fixed Mounting Bracket Fitted to an MBT616D MicroBlock Flexure Stage
  • Fixed Mounting Brackets Extend the Mounting Surface of Our Stages
  • Attach Directly to the Fixed Portion of Our 3-Axis NanoMax™ and MicroBlock™ Stages
  • Two Mounting Surface Length Options:
    • AMA007: 26 mm (1.02") Mounting Arm with Three 8-32 (M4), Four 6-32 (M3),
      and Two 4-40 (M2) Tapped Holes
    • AMA009: 56 mm (2.20") Mounting Arm with Seven 8-32 (M4), Six 6-32 (M3),
      and Four 4-40 (M2) Tapped Holes

These two angle brackets mount directly to the fixed portion of the 3-Axis NanoMax and MicroBlock stages. The AMA007 mounting bracket can be used to create fiber launch systems that utilize our aspheric lenses in place of much longer microscope objectives. The AMA009 mounting bracket is used in our fiber launch systems; the large mounting surface is ideal for mounting large or multiple components near a flexure stage.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
AMA007 Support Documentation
AMA007Short, Fixed Mounting Bracket, 26 mm Long
$80.77
3-5 Days
AMA009 Support Documentation
AMA009Long, Fixed Mounting Bracket, 56 mm Long
$89.10
3-5 Days
+1 Qty Docs Part Number - Metric Price Available
AMA007/M Support Documentation
AMA007/MShort, Fixed Mounting Bracket, 26 mm Long, Metric
$80.77
3-5 Days
AMA009/M Support Documentation
AMA009/MLong, Fixed Mounting Bracket, 56 mm Long, Metric
$89.10
3-5 Days
Back to Top

Flexure Stage Accessories: Extended Top Platforms

AMA003 Application Image
Click to Enlarge
AMA003 Extended Top Plate Fitted to an MBT616D MicroBlock Flexure Stage
  • Extend the Mounting Surface of Our Stages
  • Standard Groove
  • Array of 8-32 (M4), 6-32 (M3), and 4-40 (M2) Tapped Holes
  • Replaces the Movable Top Plate of Our NanoMax™, MicroBlock™, or RollerBlock™ Stages
  • Three Mounting Surface Length Options:
    • 88 mm (3.46")
    • 95 mm (3.74")
    • 105 mm (4.13")

These extended platforms are designed to be replacements for the top plate of the NanoMax, MicroBlock, or RollerBlock stages. The extended mounting surface contains of array of 8-32 (M4), 6-32 (M3), and 4-40 (M2) tapped holes, which are convenient for attaching components or accessories that need to reach into smaller spaces. Three sizes are available, offering platform lengths of 88.0 mm (3.46"), 95.0 mm (3.74"), or 105 mm (4.13"). Two accessory mounting cleats are also included with the purchase of each platform.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
AMA001 Support Documentation
AMA001Extended Top Platform, 88 mm
$108.10
3-5 Days
AMA003 Support Documentation
AMA003Extended Top Platform, 95 mm
$108.10
Lead Time
AMA005 Support Documentation
AMA005Extended Top Platform, 105 mm
$108.10
3-5 Days
+1 Qty Docs Part Number - Metric Price Available
AMA001/M Support Documentation
AMA001/MExtended Top Platform, 88 mm, Metric
$108.10
3 Weeks
AMA003/M Support Documentation
AMA003/MExtended Top Platform, 95 mm, Metric
$108.10
3-5 Days
AMA005/M Support Documentation
AMA005/MExtended Top Platform, 105 mm, Metric
$108.10
3-5 Days
Back to Top

Flexure Stage Accessories: Post Assemblies for Positioning Stages


Click to Enlarge

HLD001 Laser Diode Mount Matched to the Deck Height of a
6-Axis Flexure Stage Using an AMA029D Post Assembly
  • Post Assemblies Extend the Mounting Surface of Our Stages
  • Top Plate Contains Our Standard Groove Along with Six 6-32 (M3) Tapped Holes
  • Mounts to an Optical Table Using 1/4"-20 (M6) Cap Screws
  • Compatible with Three Deck Height Options:
    • 62.5 mm
    • 81.5 mm
    • 112.5 mm

Thorlabs' AMA029 Platform Assemblies are intended to facilitate the construction of complex optical systems that employ our varied motion control products. We offer three platforms with heights that match the working platform heights of our stages and accessories (see the table below).

The photo to the right shows a 6-axis flexure stage with an FSC102 Force Sensor. The AMA029D post assembly is used to raise an HLD001 Laser Diode Mount up to the same working height of 112.5 mm.

If a custom height assembly is required, please contact your local Thorlabs office.

Item # Use Deck Height
AMA029A Matches 62.5 mm Standard Deck Height 62.5 mm
AMA029C Matches 3-Axis Stage and 19 mm Tilt Stage 81.5 mm
AMA029D 4-, 5-, and 6-Axis Stages with 112.5 mm Deck Height 112.5 mm
Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
AMA029A Support Documentation
AMA029APlatform, Matches 62.5 mm Standard Deck Height
$71.28
3-5 Days
AMA029C Support Documentation
AMA029CPlatform, Matches 3-Axis Stage & 19 mm Tilt Stages - 81.5 mm Deck Height
$71.28
3-5 Days
AMA029D Support Documentation
AMA029DPlatform, Matches 4, 5, 6-Axis Stages with 112.5 mm Deck Height
$71.28
3-5 Days
+1 Qty Docs Part Number - Metric Price Available
AMA029A/M Support Documentation
AMA029A/MPlatform, Matches 62.5 mm Standard Deck Height, Metric
$71.28
3-5 Days
AMA029C/M Support Documentation
AMA029C/MPlatform, Matches 3-Axis Stage & 19 mm Tilt Stage - 81.5 mm Deck Height, Metric
$71.28
3-5 Days
AMA029D/M Support Documentation
AMA029D/MPlatform, Matches 4,5, 6-Axis Stages with 112.5 mm Deck Height, Metric
$71.28
3-5 Days
Back to Top

Flexure Stage Accessories: Free-Standing Table Platform

AMA023_025 Platforms
Click to Enlarge

AMA025 Platform Fitted Next to an MBT616D MicroBlock Flexure Stage
  • Free-Standing Platform Extends the Mounting Surface of Our Stages
  • Top Surface Contains Our Standard Groove with Four 6-32 (M3) Tapped Holes
  • Mounts to an Optical Table Using 1/4"-20 (M6) Cap Screws

The AMA025(/M) Platform attaches directly to the optical table and is designed to match the platform height of the NanoMax, MicroBlock, or RollerBlock stages. In addition to the standard slot and tapped-hole pattern on the top surface, there are tapped holes on the sides. These additional holes can be used to mount other accessories or translation stages.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
AMA025 Support Documentation
AMA02525 mm Wide Table Mounting Platform, 75 mm Optical Height
$97.84
3-5 Days
+1 Qty Docs Part Number - Metric Price Available
AMA025/M Support Documentation
AMA025/M25 mm Wide Table Mounting platform, 75 mm Optical Height, Metric
$97.84
3-5 Days
Back to Top

Flexure Stage Accessories: Right-Angle Top Plate


Click to Enlarge

AMA011/M Angle Bracket Attached to a NanoMax Stage with the Stage's MMP1/M Top Plate Attached to the Side Face
  • Right-Angle Bracket Adds a Side Mounting Surface
  • Replaces the Movable Top Plate of Our NanoMax™ or MicroBlock™ 3-Axis Stages
  • Top Surface Contains Our Standard Groove along with Seven 8-32 (M4) and Eight 6-32 (M3) Tapped Holes

The AMA011(/M) Right-Angle Bracket can be used to replace the top plate of our 3-axis flexure stages (NanoMax or MicroBlock) stages. The bracket then provides a convenient, side mounting surface for attaching other components or accessories to the stage.

Shown to the right is an AMA011/M angle bracket attached to a NanoMax stage, with the MMP1/M Top Plate (included with the stage) attached to the side of the stage. Note that moving the platform on the stage will also move any mounted accessories.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
AMA011 Support Documentation
AMA011Right-Angle Top Plate for NanoMax & MicroBlock 3-Axis Stages
$89.10
3-5 Days
+1 Qty Docs Part Number - Metric Price Available
AMA011/M Support Documentation
AMA011/MRight-Angle Top Plate for NanoMax & MicroBlock 3-Axis Stages, Metric
$89.10
3-5 Days
Back to Top

Flexure Stage Accessories: Top Plates


Click to Enlarge

RB13P1 Top Plate Shown Replacing the MMP1 Crossed Groove Mounting Plate on a Flexure Stage

The RB13P1(/M) Mounting Plate can be used as an alternative to the top plate included with our 3-axis flexure stages. It has a generous array of both 1/4"-20 (M6) and 8-32 (M4) mounting holes to adapt the NanoMax, MicroBlock, or RollerBlock stages to general-purpose optical table translation stages.



Click to Enlarge

HCS030 Optic Mount Mounted to an MMP1 Top Plate

The MMP1(/M) Replacement Mounting Plate allows older NanoMax, MicroBlock, or RollerBlock stages to be updated to the latest 'crossed groove' design, which is necessary for some accessories (e.g., HCS030 Optics Mount shown opposite). They also allow imperial stages to be converted to metric variants and vice versa. This plate is provided with all stages and accessories shipped after February 2006.

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
RB13P1 Support Documentation
RB13P1Adapter Plate with 1/4"-20 and 8-32 Taps
$60.59
3-5 Days
MMP1 Support Documentation
MMP1Replacement Mounting Plate for Flexure Stages with 8-32, 6-32, and 4-40 Taps
$69.87
3-5 Days
+1 Qty Docs Part Number - Metric Price Available
RB13P1/M Support Documentation
RB13P1/MAdapter Plate with M6 and M4 Taps
$60.59
3-5 Days
MMP1/M Support Documentation
MMP1/MReplacement Mounting Plate for Flexure Stages with M4, M3, and M2 Taps
$69.87
3-5 Days
Back to Top

Accessory Lockdown Clamps

To lock an accessory in place, rotate the AMA010 cleat so that the flat is facing the stage's groove. Place the accessory into the groove between the cleats, rotate the cleat so that the rounded edge covers the edge of the mount, and lock down the cap screw.

Click for Details

Accessories mounted in close proximity using the AMA110 Mounting Block.
Lockdown Clamps
Item # AMA010 AMA010/M AMA110 AMA110/M AMA111
Included Hardware 6-32 Cap Screw (x15)
M3.5 Washer (x15)
M3 Cap Screw (x15)
M3 Washer (x15)
6-32 Nylon Tip
Setscrew (x12)

6-32 Cap Screw (x4)
M3 Nylon Tip
Setscrew (x12)

M3 Cap Screw (x4)
6-32 Cap Screw (x2)
M3 Cap Screw (x2)
M3.5 Washer (x2)
M3 Washer (x2)
7/64" Hex Key
2.5 mm Hex Key
Mechanical Diagram
(Click for Details)


Click to Enlarge
Close proximity mounting using the AMA010 Cleat and AMA111 Clamp.

  • Secures Components to NanoMax, MicroBlock, or RollerBlock Stages
  • Cleats for Mounting Single Components
  • Mounting Blocks and Clamps for Close Proximity Mounting of Multiple Components

The AMA010(/M) Cleats have a flat milled along one side. To lock an accessory along the center alignment groove, rotate the cleat so that the flat is facing the groove. Place the accessory into the groove between the cleats, rotate the cleat so that the rounded edge covers the edge of the mount, and lock down the 6-32 (M3) locking screw and washer. The cleats can be rotated without needing to remove the locking screws. See the animation to the right for details. The included screws are 5/16" (8 mm) long and are used with a 3/32" (2.5 mm) hex key.

For mounting multiple components in close proximity, we offer the AMA110 mounting blocks. These mounting blocks feature a line of nylon-tipped setscrews to secure components, and allow for easy repositioning and very close mounting. The blocks are secured via two holes and are supplied with either 6-32 or M3 cap screws.

The AMA111 Narrow Device Mounting Clamps offer an alternative solution when devices need to be mounted close together. They are secured using an M3.5 or M3 washer and a 6-32 or M3 cap screw, compatible with a 7/64" or 2.5 mm hex key, respectively. 

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Imperial Price Available
AMA010 Support Documentation
AMA010Cleats with 6-32 Locking Screws, Qty. 15
$44.54
Lead Time
AMA110 Support Documentation
AMA110Optic Mounting Block, Qty. 2
$60.38
3-5 Days
+1 Qty Docs Part Number - Universal Price Available
AMA111 Support Documentation
AMA111Narrow Device Mounting Clamps, Qty. 2
$31.49
3-5 Days
+1 Qty Docs Part Number - Metric Price Available
AMA010/M Support Documentation
AMA010/MCleats with M3 Locking Screws, Qty. 15
$44.54
3-5 Days
AMA110/M Support Documentation
AMA110/MOptic Mounting Block, Qty. 2, Metric
$60.38
3-5 Days