30 mm Cage System Mount for FiberBench Components
- Mount FiberBench Components in a 30 mm Cage System
- Flexure Clamping Mechanism for Secure Mounting without Disassembly of Existing Cage System
- Bottom-Located Tap for Post Mounting
CPFB
Application Idea
Two FiberBench FBR-LPVIS Rotating Linear Polarizer Modules Secured by CPFB Mounts in a 30 mm Cage System
Please Wait
Click to Enalrge
The two snap-in flexure mechanisms can be locked in place within a cage system.
Features
- Dowel Pin Holes for Mounting FiberBench Components
- Snap-In Flexure Mechanism for Integration Into Existing 30 mm Cage Systems
- Post Mountable via 8-32 (M4) Tap
This 30 mm Cage System Mount for FiberBench Components allows integration of our line of FiberBench Components with our 30 mm cage system. It includes two through holes that fit the dowel pins on our FiberBench optic mounts. Once the dowels have been inserted, they can be locked in position using a 0.035" balldriver or hex key to tighten the setscrew on the front face of the mount.
The mount includes two snap-in flexure clamps for attaching our Ø6 mm cage rods, which can be locked with a 5/64" (2.0 mm) hex key. This snap-in feature allows components to be easily inserted and removed without disassembling the entire cage system. When this mount is used in a cage system that is attached to a FiberBench with the HCA3-CP cage plate, the beam height for all optical components is the same. An 8-32 (M4) tapped hole on the bottom of the CPFB mount can be used to secure it to a Ø1/2" post. Please note that this cage system mount cannot be used with FiberBench optic mounts that are more than 0.75" (19.1 mm) wide in the direction perpendicular to the optical axis.
Compatible FiberBench Accessories | ||
---|---|---|
Optic Mounts (compatible with FBR, FT-SM05, FBTP, and HCB) | Alignment Tools | Polarizers |
Beamsplitter Modules | Mirror Modules | Rotating Wave Plates |
Posted Comments: | |
No Comments Posted |