"; _cf_contextpath=""; _cf_ajaxscriptsrc="/cfthorscripts/ajax"; _cf_jsonprefix='//'; _cf_websocket_port=8578; _cf_flash_policy_port=1244; _cf_clientid='79C5F77DAD614077F6088C8B9F179496';/* ]]> */
| ||||||||||||||||||||||||||||
BNC Cables![]()
CA2648
CA2824
2249-C-24
CA3124
SMC Female Connector SMA Male Connector BNC Male Connector BNC Male Connector ![]() Please Wait All the cables sold by Thorlabs that have a BNC connector on at least one end are displayed on this page. The table below will take you to web pages that contain cables with other connectors.
![]()
![]()
![]() ![]() Click for Details Boot Style May Vary
![]()
This cable has a right-angle, SMB female connector on one end and a straight, BNC male connector on the other. The connectors are made of nickel-plated brass. The RG-178 coaxial cable is flexible enough to reach a minimum bend radius of 0.4", and the 90° SMB connector allows the cable to be connected in tight areas without putting lateral force on the connection, making this cable ideal for use in space-constrained setups. The PAA236R can be used with our Polaris® mirror mounts with piezoelectric adjusters. ![]() ![]() Click for Details Boot Style May Vary
![]()
The CA3339 RG-174 coaxial cable features a male MMCX connector on one and a male BNC connector on the other. It can be connected to an I/O port on the Kinesis® Vertical Translation Stage for external triggering applications. ![]()
The T1508 is a test lead holder for wires up to 0.210" (5.33 mm) in diameter and has 14 slots for cables. It is ideal for holding fiber optic patch cables. The T2708 is a test lead holder for wires up to 0.450" (11.43 mm) in diameter and has 9 slots for cables. The cable racks are made from cold rolled steel with a baked enamel finish. The wall mounting holes are separated by 3" (76.2 mm). Both racks are 11" (279 mm) long and extend outward from the wall by 3.5" (88.9 mm). | ||||||||||||||||||||||||||||
|