The PV1 Panna Vise is ideal to mount onto a working surface. It can be secured to the working surface in three places using the Ø1/4" (6.4 mm) countersunk mounting holes located on a bolt circle that is 4.31" (109.5 mm) in diameter. The vise jaws are mounted on a post that slides into the split-ball joint. This arrangement allows the vise jaws to turn 360° on the post as well as rotate 360° and tilt 90° using the ball. All three degrees of freedom are locked down using a single locking knob, which makes the Pana Vise easy to orient so that the part being held can be worked on at the optimal angle.

• Vise Jaws Mounted on a Split-Ball Joint: 90° Tilt, 360° Turn, and 360° Rotation
• Nominal Dimensions of Jaws: 2.5" (64 mm) Wide x 0.5" (13 mm) Tall with 2.25" (57 mm) Capacity
• Nylon Jaws: Electrically Isolated, Non-Marring
• Nominal Overall Height: 6.25" (160 mm)