- Designed for Ø2" Optics
- 60 mm Cage Compatible
- Post-Mountable: Two #8-32 Tapped Holes
The KC2 is designed with a smooth, double-bored mounting hole for a Ø2" optic and is complete with a nylon-tipped locking screw for securing the optic.
The KC2 offers three independently locking adjusters, each with a collet that can be tightened without causing the postion of the adjuster to drift. The rugged mechanical design provides excellent stability when mounted in a cage system or on a post. Both the front and rear plates have been machined with four clearance holes designed for direct compatibility with our 60 mm cage system standards. The rear plate provides locking setscrews to clamp to cage rods for secure positioning. The cage rod holes in the front plate are sufficiently oversized to allow ±3° tip and tilt without interference with the rods.Specifications
- Angular Rotation: ±3°
- Minimum Optic Thickness: 0.08"
- Unpackaged Weight: 335 g