The BP1M2-300 M² Analysis Extension Set allows automated, motorized, computer controlled M² analysis with our BP100 Series (sold separately). The Extension Set comprises the motorized translation stage, plus mounting accessories to mount a BP100 Beam Profiler onto the stage and the stage onto a breadboard. The stage is configured for 300mm travel length and is controlled by the M² software module of the BP100 Series Beam Profiler via RS232. No additional driver is required.

• Translation Stage: VT-80 + Pollux Controller
• Controller Interface: RS232, Convertible to USB
• Translation Range: 300 mm
• Optical Axis Height: 90 mm
• Wavelength Range: 200-1800nm, According to Beam Profiler Range, Extension Around Nominal Range Allowed
• M² Measurement Range: 1.0 - No Upper Limit
• Typical M² and k Accuracy: ± 5%, Depending on Optics and Alignment
• Accepted Beam Diameter for 5% Accuracy:
• BP104: 20 µm to 2 mm
• BP109: 20 µm to 4.5 mm
• Minimum Detectable Divergence Angle: < 0.1 mrad
• Applicable Light Sources: CW and Pulsed Sources =300 kHz
• Typical Measurement Time: 20-40 Seconds Depending on Beam Shape and Settings