Click to Enlarge
Optics are Secured by a Nylon-Tipped 8-32 Setscrew

• Holds 1" or 25 mm Tall Rectangular Optics
• Nylon-Tipped 8-32 Setscrew Secures Optics
• Mounts Optics Greater than 3.0 mm (0.12") Thick

The KM100S mounts 1" or 25 mm tall square and rectangular optics such as mirrors and diffraction gratings that are at least 3.0 mm (0.12") thick. The open design accepts rectangular optics up to 2.0" (50.8 mm) wide. The kinematic tip/tilt adjustments, driven by two 1/4"-80 adjusters, allow for ±4° of angular adjustment. An optional accessory, the LN2580 bronze locking nut, is available to lock the adjusters once the desired position is reached.

Click to Enlarge

• Universal Design, Capable of Mounting Optics up to 1.3" (33.0 mm) Tall
• Right- and Left-Handed Configurations Available
• Mounts Rectangular Optics up to 65 mm Wide
• Rubber Pads Protect Optics from Damage

The KM100C and KM100CL combine our unique CH1A Universal Cylindrical Lens Mount and our popular KM100 Kinematic Mirror Mount to produce a right-handed or left-handed kinematic mount for holding cylindrical lenses, respectively. Optics are securely held in place with a rubber-padded arm that can be locked with a 0.05" hex key. The mount accepts cylindrical optics up to 1.3" (33.0 mm) tall. To accommodate taller optics, additional ER rods can be screwed onto those included with the mount. The kinematic tip/tilt adjustments, driven by two 1/4"-80 adjusters, simplify positioning. An optional accessory, the LN2580 bronze locking nut, is available to lock the adjusters once the desired position is reached.