it will be great if you can have separate part number for the tubes, and does not include the lens so people can order online easily
Poster: info
Posted Date: 2009-08-08 04:49:37.0
Dear Sir / Madam, I saw your website and impressed by Laser Diode Collimators products. We try to manufacture prototype laser rangefinder with diode laser that specified below. For this we need an optics unit to reduce beam divergence to 0.5 mrad. We search some companies and find your system can be useful for ours. If you can support us we hare very glad to hear about your suggestion. We have a diode laser that specification as below: 1. Partnumber: 905D3S3J08R 2. Company: Laser Components 3. Wavelength: 905 nm 4. Peakpower: 210 W 5. Beam Spread (50% peak intensity) Parallel: 11 degrees Perpendicular: 25 degrees 6. Emitting Area: 200 um* 250 um 7. Package: R= 9 mm CD 8. Laser windows Thickness: 0.25 mm 9. Datasheet: http://www.lasercomponents.com/uk/fileadmin/user_upload/home/Datasheets/lcc/905d3j09.pdf 10. Quantity: 5 pcs I appreciate it if you could give me an estimate of the cost and some information about delivery time, Shipping. Thanks & Best regards
Poster: klee
Posted Date: 2009-06-26 14:40:32.0
A response from Ken at Thorlabs to futia: We can offer special collimation tubes with C-coated (1050 - 1600 nm) lenses. Please send an email to techsupport@thorlabs.com, indicating which of the 4 tubes you need, and we will send you a quote.
Poster: futia
Posted Date: 2009-06-26 14:31:00.0
It would be useful if ThorLabs sold Collimation Tubes with optics coated for 1050 to 1500nm as well.
Poster: Greg
Posted Date: 2009-04-10 08:18:18.0
A response from Greg at Thorlabs to aidi: The LT230P-B is compatible with the SR9A-DB9, but neither is compatible with the ITC502. In order to temperature controller your laser, you need a TEC element. If you are looking for a collimated laser that you can also temperature control, I suggest looking at our Fiber Pigtailed Lasers and using one with our TCLDM9 TEC mount. You will then need a laser diode driver and TEC controller. If you have further questions, please let me know via e-mail.
Poster: aidi
Posted Date: 2009-04-09 21:12:24.0
Is this SR9A-DB9 can work together with LT230P-B collimation tube and ITC502 Temperature controller? Thank you
Complete Package: Each Unit is Shipped Preassembled Less the Laser and Aspheric Lens
Compatible with Our Extensive Line of Ø1" Lens Tubes
Broad Selection of Collimation Optics
The LDH3-P1 Series T0-3 Laser Diode Kit can be used one of two way. If the laser output power is low and no heat sinking is required, the laser can be mounted directly to the LDH3 (as shown in the photograph). For higher power lasers, or where better temperature regulation is required, the LDH3-P1 can be mounted directly onto any heat sink that is designed to accept T03 laser packages. The LDH9-P1 Series Ø9 mm and Ø5.6 mm Laser Diode Kit comes with an adapter for Ø5.6 mm lasers.
Includes Laser Socket and 2 Feet of Shielded Cable
Threads into LT Series of Collimation Tubes
Includes Clamping and Reverse Protection Diodes to Suppress ESD
Available with DB9 Connector for Mating Directly with LDC200C Series Laser Controllers
The SR9 Series of strain relief and ESD protection products offer a convenient and safe means of connecting your 5.6 mm or 9 mm laser diode to our line of Laser Diode Controllers. Each model comes with a laser socket mounted to a small Printed Circuit Board. The PCB contains a Schottky diode to clamp any reverse voltages that might appear across the laser diode, as well as a 3.3 V Zener diode to shunt any excessive voltages or ESD away from the diode.
Each model of the SR9 Series corresponds to one of the standard Pin Styles for laser diodes (see the diagram below) and is compatible with our LT Series Collimation Tubes.
The SR9HB is specially designed for blue laser diodes with a built-in photodiode and supports Pin Style B. The SR9HE is specifically designed to work with 3-pin laser diodes that have no built-in photodiodes. Both can be used with a maximum laser diode forward voltage of 7.5 V.
The series is available with or without a DB9 connector. All SR9x-DB9 models are pin compatible with our Laser Diode Controllers.
Loading...
Posted Comments:
Poster: jens
Posted Date: 2010-02-05 10:32:59.0
A reply from Jens at Thorlabs: we can offer almost every subcomponent used in any of our products, in this case the Tube itself, Retaining Ring, Rubber O-Ring, and Adapter for 5.6 mm diodes. We will contact you with price/lead time via email.
Also to make the process of ordering the subcomponents easier we have added a link to our techsupport email box to this section of the web.
( 0)
Zoom
Loading...
LT110P-B
- 5.6 mm and 9 mm Laser Package, Collimation Tube with Optic, 0.85" Package Length
Zoom
Zoom
Zoom
